Volume Adjustment; Settings Menu; Switching Off The Alarm - Trevi DAB 791 R Guia Del Usuario

Note: When first turned on or after a reset to factory settings, the unit will automatically
scan the stations DAB / DAB +.
5. Hold for a few seconds, the POWER / MODE button (9) to switch the system to standby mode.
6. Turn the ON / OFF switch (4) to the OFF position to turn off the device completely.

VOLUME ADJUSTMENT

1. Press the VOL (14) or VOL + (15) to decrease or increase the volume.

SETTINGS MENU

1. In radio mode, press and hold the INFO / MENU button (7), the display will show Menu Set.
2. Press the PREV (11) and NEXT (12) and select the desired item among: Time / Date,
Alarm 1 Set, Alarm 2 set, Sleep Set, Factory Reset, System version and FM Scan set
(only in Radio FM).
3. Press the ENTER / SNOOZE button (13) to enter the settings of the selected item.
Menu Set
Time / Date: Press the ENTER / SNOOZE button (13) to set Time (Hour) -> Minutes (Min)
-> Year (Year) -> Month (Month) -> Data (Date). Press the PREV (11) and NEXT (12)
to change the parameters.
Note: If the unit is turned off using the ON / OFF switch, the settings for Time / Date will
be reset. After turning the unit on, the settings for Time / Date will be synchronized with
the broadcast station.
Alarm 1/2 Set: press the ENTER / SNOOZE button (13) to set ON / OFF Alarm (Alarm 1
or 2) -> Time (Hour) -> Minutes (Min) -> Alarm Volume (Vol) -> Alarm mode DAB
/ FM / alarm (mode). Press the PREV (11) and NEXT (12) to change the parameters.
When alarms are activated, standby the display shows the icon of a bell (two icons if
the alarms are active simultaneously).
Sleep Set: allows you to select a time after which the radio will automatically shut down.
Press the ENTER / SNOOZE button (13) to set the Sleep function; Press the PREV (11)
and NEXT (12) to change the parameters of Sleep (OFF function, 120, 90, 60, 45, 30,
15, 5 minutes). When and 'enables the function, the display shows the letter S followed
by the number of minutes off the car missing.
System version: To view the software version.
Factory Reset: press the ENTER / SNOOZE button (13) and select "Yes" if you want the
device to return to their factory settings.
FM Scan setting (FM mode only): Press the ENTER / SNOOZE button (13) to enter the
function and choose from:
Only: to start the search of the only stations with stronger signal.
All: to start the search of all stations (with weak and strong signal).

SWITCHING OFF THE ALARM

To disarm the alarm (radio or buzzer), press the POWER / MODE button (9) to stop it completely.
If you want to silence the alarm, press the ENTER / SNOOZE button (13); the interruption
lasts nine minutes, after which the alarm on again.
10