Evolution EVOMAG 42 Manual Del Usuario página 3

SPEciFicaTioNS
MachiNE
Motor (UK/EU) 230V ~ 50/60Hz
Motor (UK) 110V ~ 50/60Hz
Motor (USA) 120V ~ 60Hz
Number Of Speeds
Speed (No Load)
insulation Class
power Cord length
Weight
cuTTER caPaciTiES
Maximum Annular Cutting Capacity
Maximum Cutting Depth
Cutter shank
standard Twist Drill Capacity
MagNET
Magnetic Adhesion
Minimum Plate Thickness
DiMENSioNS
Magnet Dimension
Maximum Machine Height
Minimum Machine Height
Machine Width
NoiSE & ViBRaTioN
Sound Pressure Level L
PA
Sound Power Level L
WA
Hand Arm Vibration
MoDEl NuMBERS
United Kingdom
United States
Europe
4
www.evolutionpowertools.com
METRic iMPERial
1200W 5A
1200W 11A
1200W 10A
1 1
450min -1 450rpm
1 1
2.5m 8' 2"
12kg 26lb
42mm 1-5/8"
50mm 2"
19mm 3/4"
13mm 1/2"
1300kg f 2860lbs f
10mm 3/8"
40 x 90 x 180mm 1-5/8 x 3-1/2 x 7-1/8"
654mm 25-3/4"
420mm 16-1/2"
222mm 8-3/4"
89.40 dB(A) K=3 dB(A)
102.4 dB(A) K=3 dB(A)
0.629m/s 2 K=1.5m/s 2
230V: 095-0001 110V: 095-0002
095-0003
095-0004
www.evolutionpowertools.com
(1.6)
Note: The vibration measurement was made
under standard conditions in accordance with:
BS EN 61029-1:2009
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
(1.7)
ViBRaTioN
waRNiNg: when using this machine the
operator can be exposed to high levels
of vibration transmitted to the hand and
arm. it is possible that the operator could
develop "Vibration white finger disease"
(Raynaud syndrome). This condition
can reduce the sensitivity of the hand
to temperature as well as producing
general numbness. Prolonged or regular
users of this machine should monitor
the condition of their hands and fingers
closely. if any of the symptoms become
evident, seek immediate medical advice.
• The measurement and assessment of
human exposure to hand-transmitted
vibration in the workplace is given in: BS EN
ISO 5349-1:2001 and BS EN ISO 5349-2:2002
• Many factors can influence the actual
vibration level during operation e.g. the
work surfaces, condition and orientation
and the type and condition of the machine
being used. Before each use, such factors
should be assessed, and where possible,
appropriate working practices adopted.
Managing these factors can help reduce the
effects of vibration:
5
handling:
• Handle the machine with care, allowing
the machine to do the work.
• Avoid using excessive physical effort on
any of the machine's controls.
• Consider your security and stability, and
the orientation of the machine during use.
work Surface:
• Consider the work surface material;
its condition, density, strength, rigidity
and orientation.
waRNiNg: The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways in
which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time).
(1.8)
laBElS & SyMBolS
waRNiNg: Do noT operATe MACHine
if wArning AnD/or insTruCTion
LABELS ArE MISSING Or DAMAGED.
ConTACT evoluTion power Tools for
replACeMenT lAbels.
NoTE: ALL Or SOME OF THE FOLLOWING
SyMBOLS MAy APPEAr IN THE MANUAL Or
on THe proDuCT.
SyMBol DEScRiPTioN
V Volts
A Amperes
Hz Hertz
Min
-1 Speed
EN
ES
FR
TR