Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Note: When drilling some very large flat,
horizontal plates, the fitting of the safety
strap or chain may be impossible. Consult the
responsible person for guidance.
• The safety strap or chain should be
attached to the fixing points provided and
checked for security before commencing
any and every drilling operation.
(4.1)
gETTiNg STaRTED uNPacKiNg
caution: This packaging contains sharp objects.
Take care when unpacking. This machine
could require two persons to lift, assemble and
move. remove the machine, together with the
accessories supplied from the packaging. Check
carefully to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all the
accessories are complete. If any parts are found
to be missing, the machine and its accessories
should be returned together in their original
packaging to the retailer. Do not throw the
packaging away; keep it safe throughout the
guarantee period. Dispose of the packaging in
an environmentally responsible manner. recycle
if possible. Do not let children play with empty
plastic bags due to the risk of suffocation.
(4.2)
iTEMS SuPPliED
Description
Quantity
Instruction Manual
1
Coolant Tank system
1
Handles
3
Safety Strap
1
Safety Guard
1
12
www.evolutionpowertools.com
Safety Guard Fixing Screws
2
Hex Key 2mm
1
Hex Key 3mm
1
Hex Key 4mm
1
Hex Key 5mm
1
Carry Case
1
(4.3)
aDDiTioNal accESSoRiES
in addition to the accessories supplied with
this machine the following accessories are
available from Evolution's online shop at
www.evolutionpowertools.com or from
your local retailer.
(4.4)
Description
Part No
Chuck Adaptor
HTA 47
Chuck & Chuck Key 13mm
HTA 153
Countersink bit 0-30mm
HTA 030
3 piece Cutter Kit
6 piece Cutter Kit
Cyclone Cutters
www.evolutionpowertools.com
MachiNE oVERViEw
1
2
7
5
6
4
3
MachiNE FiTTED wiTh
aNNulaR cuTTER
1. Magnet On/Off Switch
2. Motor On/Off Switch
3. Guard
4. Annular Cutter (not included)
5. Secondary Slide Locking Lever
6. Safety Strap
7. Coolant Tank
8. Spindle Hub And Feed Handles
13
8
1
2
MachiNE FiTTED wiTh
3 Jaw chucK
1. 3 Jaw Chuck
2. Drill Bit (Not included)
EN
ES
FR
TR
Publicidad
Tabla de contenido
