Safety Messages to Installers and Users
It is important to follow all instructions shipped with this product.
This loudspeaker is to be installed by a trained electrician who is
thoroughly familiar with and will follow all applicable national and
local codes in the country of use.
This loudspeaker should be considered a part of the warning system
and not the entire warning system.
The selection of the mounting location for the loudspeaker, its
controls and the routing of the wiring are to be accomplished under
the direction of the facilities engineer and the safety engineer. In
addition, listed below are some other important safety instructions and
precautions you should follow:
•
Read and understand all instructions before installing or operating
this equipment.
•
Brass inserts have the potential to store charge when they are not
plugged. Consideration should be taken to prevent these from
becoming a sparking hazard.
•
Never alter the unit in any manner. Safety in hazardous locations
may be endangered if additional openings or other alterations are
made in units specifically designed for use in these locations.
•
Do not connect this loudspeaker to the system when power/audio
system is on.
•
All effective warning speakers produce loud sounds, which
may cause, in certain situations, permanent hearing loss. Take
appropriate precautions such as hearing protection. The device
should be installed far enough away from potential listeners to
limit their exposure while still maintaining its effectiveness.
•
After installation, ensure that all threaded joints are properly
tightened.
•
After installation, test the loudspeaker system to ensure that it is
operating properly
Model G-SPK Global Series Loudspeaker
Installation and Maintenance Instructions
5