Pentair Fleck 6600 Manual De Uso página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 99
E
N
G
L
I
S
H
6.5
PREVIOUS DAYS WATER USAGE (Pd):
Not viewed in timeclock regeneration mode.
Press the
usage recorded. This display is used as an aid in the valve maintenance and is not an option setting. The unit of
measure used depends on the display format chosen
Ex.: 28,4 m3(1)
6.6
SYSTEM CAPACITY
Press the button
set the capacity of the softener. If required, the electronics will calculate a reserve. Adjust the value with the
Ex.: Capacity 1200 m3° tH
6.7
REGENERATION CYCLE PROGRAMMING
to
The cycle 6 will not be viewed if the cycle 5 is cancelled
6.12
Press the button
cycles. Up to 6 cycles can be programmed. Each display is used to set the duration time (in minute) of that
cycle in the regeneration.
The first display in the series is regeneration cycle 1, example: Backwash
Ex.: - Cycle 1 (Backwash): 8 minutes
6.13
CHLORINE CELL ACTIVATION (J):
Press the
function during cycle 1.
Ex.: - No chlorinator installed
6.14
CHLORINE CELL POWER DURATION
Press the
power on duration.
Note: During a regeneration with the chlorine cell set, for example cycle 2, the regeneration display
will show:
(1) The unit of measure depends on the display format chosen.
All examples above are based on the cubic meter format (see point 6.17).
18
6 - ADVANCED PROGRAMMING MODE
6600 / 6665
button. This display is identified by the letters "Pd". This display shows the previous days water
. The unit of measure used depends on the display format chosen
and
set buttons.
:
(1)
. The next displays are part of a series of option settings used to program the regeneration
- Cycle 4 (Brine refill): 8.4 minutes (8 min and 24 s.)
button . This display is identified by the letter "J". This display is used to activate the chlorine
- Chlorinator to turn on during the cycle 1
button . This display is identified by the letter "dJ". This display is used to set the chlorine cell
.
(1)
6600 – 6665 – 6700 – 6765
[Pd - - 28.4]
. This display is used to
(1)
[- - - -1200]
[5 --- O F F ].
[1 - - - 8.0]
[4 - - - 8.4]
[J- - - OFF]
[J- - - - - -1]
[2C - - 38.2]

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fleck 6665Fleck 6700Fleck 6765

Tabla de contenido