Dismantling And Disposal - Pentair Nocchi VSD Serie Manual Del Usuario

EN
CHAPTER 7

DISMANTLING AND DISPOSAL

Before performing any work on the device, disconnect the power supply Make sure the power supply cannot be
accidentally restored. Intervene after the elapse of 2 minutes from disconnection to prevent possible electric shock.
• Electrically disconnect the device from the system by following the safety rules.
• Open the use point that is nearest to the device to discharge the system pressure.
• Before dismantling, close the shut-off valves upstream and downstream of the device.
Loosen the fittings to discharge any residual pressure in the system. Ensure that the liquid coming out cannot harm
persons or cause damage to property.
• Remove the device from the system.
Disposal of this product or parts of it must be performed in accordance with local standards, using public or private
systems of waste collection.
22