SOMFY Sonesse 30 RS485 Manual Del Usaurio página 7

COMMISSIONING
1) RS485 :
See page 58
2) DRY CONTACT
Checking the direction of rotation
Press the setting tool UP button:
a) If the shade is raised, the direction
of rotation is correct. Move to the sec-
tion entitled «Adjusting the end limits».
b) If the shade is lowered, the direction
of rotation is incorrect. Move to the
next step.
until the shade jogs: the direction of
Press the setting tool UP button to
check the direction of rotation.
Adjusting the end limits
1) Press and hold the UP button to
move the shade to the desired up
position.
DOWN buttons and release them once
the shade begins to move.
reaches the desired down position.
If necessary adjust the down position,
using the UP or DOWN buttons.
UP buttons and release them when
the shade begins to move.
its upper limit.
jogs.
Copyright © 2010 Somfy SAS. All rights reserved - V0 - 05/2010
a
b
1
3
5
2
5