Emptying The Debris Bin; Cleaning And Servicing The Filter - VLX 818R Manual De Instrucciones

EMPTYING THE DEBRIS BIN

• move alongside the garbage container.
•
• remove the bin and empty it.
• put the bin back in and lock it with the
lever.
CLEANING AND SERVICING
THE FILTER
to obtain the best performance from your
machine.
• using the automatic cleaning system;
selecting the work program (P1-P2-P3)
the machine is programmed for automatic
• using the manual cleaning system; press
it down for a few seconds. Repeat this
operation 4 or 5 times while using the
machine.
This operation should be performed at the
end of every working cycle. If the machine
is used in a dusty environment (e.g.
sawmills, warehouses where vehicles
shaker more frequently.
•
carrying out any type of work on the
machine, make sure that it is switched
deactivated. To do this, turn the key
switch to the OFF position.
• remove the debris bin from the
•
turning the two locking handles.
•
air (maximum pressure 6 bars)
•
the debris bin.
EN 14