Rowenta IS5100 Modo De Empleo página 24

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Fill the water tank with fresh water and place it on the main unit
allowing water to fill the boiler.
3. Remove the tank from main unit and empty the water from the
boiler through the same way the water goes inside.
4. Repeat step 2 and 3 several times until the scale has been removed.
C UTION: Don't fill the boiler by the steam head holes !
Never immerse the steam head in water !
The steam handle contains electronic components that could be
damaged by direct water.
TIPS
• We recommend checking the garment care label for manufacturer
recommendations before steaming. We also recommend testing the
garment on an unobtrusive area such as an inner seam.
• Read the recommendations for the maintenance of the fabrics on the
labels of the clothing to be steamed.
• Test the strength of the color of the fabric on an area of the garment
that is not visible (inside of a hem).
• void contact between the steam head and silk or velvet.
• Certain garments are smoothed more easily on the reverse side.
• If you are using the steam head at a position close to the ground, raise
the hose frequently in order to avoid the formation of condensation.
You may hear a gurgling noise if the hose is obstructed in any way.
• Heavy fabrics may need to be steamed longer.
• Be careful at all times.
24

Publicidad

Tabla de contenido
loading

Tabla de contenido