Sony SHAKE-X30 Manual De Instrucciones página 43

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playback does not start from the
first track.
Set the play mode to Normal Play
• •
(page 20).
Resume Play has been selected.
• •
Press  twice. Then, press  to
start playback.
The MP3 disc cannot be played
back.
The data is not stored in the
• •
supported format.
The folder name, track name, file
name and ID3 tag characters do
not appear properly.
The ID3 tag is not Version 1 (1.0/1.1)
• •
or Version 2 (2.2/2.3).
The character codes that can be
• •
displayed by this system are as
follows:
— Upper cases (A to Z)
— Numbers (0 to 9)
— Symbols (< > * +, [ ] \ _)
Other characters appear as "_".
The sound loses stereo effect
when you play back an AUDIO CD
or audio file.
Turn off the Vocal Fader
• •
(page 37).
Make sure the system is
• •
connected properly.
Check the speaker connections
• •
(page 16).
USB device
Transferring results in an error.
You are using an unsupported USB
• •
device. Check the information on
the website about compatible USB
devices (page 10).
The USB device is not formatted
• •
correctly. Refer to the operating
instructions of the USB device on
how to format.
Turn off the system and remove
• •
the USB device. If the USB device
has a power switch, turn the USB
device off and on again after
removing it from the system. Then,
perform the transfer again.
If the transfer and erase
• •
operations are repeated multiple
times, the file structure within the
USB device becomes fragmented.
Refer to the operating instructions
of the USB device on how to deal
with this problem.
The USB device was disconnected
• •
or the power was turned off
during transfer. Delete the
partially-transferred file, and
perform the transfer again. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions of the USB
device on how to deal with this
problem.
Audio files or folders on the USB
device cannot be erased.
Check if the USB device is write-
• •
protected.
The USB device was disconnected
• •
or the power was turned off
during the erase operation. Delete
the partially-erased file. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions of the USB
device on how to deal with this
problem.
There is no sound.
The USB device is not connected
• •
correctly. Turn off the system and
reconnect the USB device, then
turn on the system and check if
"USB" appears on the display.
43
US

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Shake-x10

Tabla de contenido