Installer System Test - Honeywell TH7000 Serie Guia De Instalacion

Installation Guide

Installer system test

Once you enter installer setup, press the Go Back button repeatedly until "Test" 1 appears.
Test number
Press Next to select next test.
Shaded areas below apply only to TH7220.
System test
1 Cooling system
2 Fan system
3 Heating system
4 Emergency
heating system
CAUTION: EQUIPMENT DAMAGE HAZARD. Compressor protection is bypassed
during testing. To prevent equipment damage, avoid cycling the compressor quickly.
69-2668ES—03
0120
Go Back Next
System status
1
EEEE es
Go Back Next
System status
0 Compressor and fan turn off
1 Compressor and fan turn on
2 Second stage compressor turns on
0 Fan turns off
1 Fan turns on
0 Heat and fan turn off
1 Heat turns on (fan on if Function 0170 is set for heat pump,
or if Function 0180 is set to "1") ** See page 6
2 Second stage heat turns on
0 Heat and fan turn off
1 Heat and fan turn on
2 Second stage heat turns on (Auxiliary heat)
20
Done
MCR31511
0
Done
MCR31520
Press DONE to exit testing.
10
Press to
st
change status