Power Management - Franke SMART FHSM 604 4I Manual Del Usuario

If you wish to modify the set time:
Select the cooking zone to modify.
X X
Press the keys and
X X
the dot lights up under the corresponding cooking
zone.
Press the keys and
X X
required.
Select the cooking zone to confirm.
X X
At the end of the previously set time, the
X X
corresponding display will flash, the hob will
deactivate the cooking zone and warn the user
with a series of beeps. Press any key to stop the beep.
Child lock
After activating the hob:
Press the keys and
X X
Press the button
X X
The controls are now locked and
„ „
the display.
Note: The control lock will not be disabled in the
event of a power failure.
To unlock the controls:
Press the keys and
X X
Press the button
X X
FHSM 604 4I / FHSM 603 3I / FHSM 603 3I DZ / FHSM 804 4I /
FHSM 803 3I / FHSM 302 2I / FHSM 604 4I WH / FHSM 603 3I DZ WH
at the same time until
to select the new time
at the same time.
after the beep.
will appear on
L
at the same time.
after the beep.

Power management

Depending on the maximum setting of output power
available (see the next section"Power Limitation
Settings"), not all cooking zones can be adjusted to
the desired level or enabled.
In this case, the display blinks a few seconds
displaying the maximum power allowed.
If no adjustments are made to other areas, cooking
will begin at the level displayed.
Power limitation settings
Power limitation setting is possible for all the following
models: FHSM 604 4I, FHSM 603 3I, FHSM 603 3I DZ,
FHSM 804 4I, FHSM 803 3I, FHSM 604 4I WH, FHSM
603 3I DZ WH.
– Setting is possible only during the first two
minutes after plug in the appliance.
– The touch has to be unlocked and all heaters have
to be switched off.
– The factory power setting is the maximum level.
– If there is a black out, power level set remains
unchanged.
– 13 –
EN