Counterknife - JF 40P Manual Técnico De Operación

6.4- Counterknife

If the counterknife (1) is worn, with the edge rounded,
invert it to use the other side.
IMPORTANT: The counterknife has four operation
edges (positions) (A, B, C and D), according ilustrated
below:
A
C
Transversal section of the counterknife (1)
When all sides are worn (rounded), replace it.
NOTE: Counterknife with rounded edge cause unlevel
cut, product shredding and waste driving power.
To disassemble the counterknife, remove the nuts (2).
Thereafter the counterknife assembly check the
play between the knives and impeller, according
described on previous item.
20
B
D
1
2