Gree XK64 Manual De Usuario página 10

Controller For The Air Source Heat Pump Water Heater
press the TIMER button to enter the timer setting interface. The TIMER and ON icons
are on and the hour value blinks. Press ▲ or ▼ to adjust the hour value and press the
TIMER button to confirm setting. Then the minute value flickers. Press ▲ or ▼ to
adjust the minute value and press the TIMER button to confirm setting. Then the OFF
icon is on and ON icon is off. The hour value blinks. Press ▲ or ▼ to adjust the hour
value and press the TIMER button to confirm setting. Then the minute value flickers.
Press ▲ or ▼ to adjust the minute value and press the TIMER button to confirm setting.
After the scheduled on/off time setting is saved, the main interface is displayed. In the
setting process, if no button is pressed within 15 seconds, the main interface will be
displayed and setting will not be saved.
Timer cancelling: After the scheduled on/off time is set, press the TIMER button
to cancel it.
Note: The scheduled on time and off time cannot be the same; otherwise, the LCD
switches to the interface for resetting the timer.
Main interface
Setting is
complete and the
timer is started.
Cancel the timer.
Timer is on and
Press the
the hour value
TIMER button.
blink.
Timer is off and
the minute value
blink.
Press the
TIMER button.
Press the
TIMER button.
8
Timer is on and
the minute value
blink.
Timer is off and
the hour value
blink.