Samsung LN-S2641D Manual Del Usuario página 18

Memorizing the Channels
Your TV can memorize and store all of the available channels for bolh "off-air" (amenna) and cable channels.
After the available channels are memorized, use the CIt _9 or CIt ® buttons to scan through the channels.
This eliminates the need to change channels by enlering 1he channel digits. There are throe steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic).
Selecting the Video Signal-source
Befnre your television can begin memorizing the available channels, you must speci_ the type of signal source that is connected to the
TV (i.e. an anlcnna or a cable system).
t. Press the MENU button to display the menu.
Press the A or - buttons to select "Channel", then press the ENTER_ button.
2,
Press the ENTER_ button select "Antenna".
Press the ..- or - buttons to select "Air" or "Cable", then press the
ENTER_ button.
Press the EXIT button to exit.
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the A or _ buttons to select "Channel", then press the ENTER_ button.
2. Press the _ or .-. buttons to select "Auto Program", then press the ENTER_ button.
3.
Press the _ or - buttons to select the antenna connection, then press the
ENTER_ button.
:_ Air: "Air" antenna signal. / Cable: "Cable" antenna signal. /
Air+Cable: "Air" and "Cable" antenna signals.
4. After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
{_ AItemately, you can press the AUTO PROG. button on the remote control to bring up
the Auto Program menu,
English- 16