Connecting Cable - Samsung LN-S2641D Manual Del Usuario

Connecting Cable
TV
To connect to a cable TV system, tbllow Theinstructions below.
Cable Mthout a Cable Box
1, Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the YV.
BecausethisTV is cable-ready, y ou donot needa cablebox to view unscrambled cablechannels.
Connecting to a Cable Box that Descrambles All Channels
ANT IN ANT
1, Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled"ANT OUT", "VHFOUT" or simply,"OUT".
2, Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
if your cable box descrambles only some channels (such as premium channels), fellow the instructions below. You wilt need a two-way
splitter, an RF (A/B) switch, and four lengths of RF cable. (These items arc available at most electronics stores.)
+ 2°
t, Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
:_ This terminal might be labeled"ANT IN",
"VHF IN"or simply, "IN".
Incoming
cable
Splitter
Incoming
cable Splitter _
Cable Box
2, Connect this cable to a two-way splitter.
3, Connect an RF cable between an OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
Incoming
IN CABLE O_
cable
Splitter
Cable Box
4, Connect an RF cable between the
ANT OUT terminal on the cable box and
the B-IN terminal on the RF(A/B) switch.
Switch
incoming
cable
$, Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
RF (,_J B )
Cable Box Switch
ANT21N I
6. Connect the last RF cable between the
LI:_ _ _ (CABLE) I OUT terminal on the RF (A/B) switch and
//
,............. _-_, _1_ @ the ANT 2 IN (CABLE) terminal on the rear
___ ......... _ _11_ _" TV Rear
of the TV.
L .......................
RF (A/B)
I
Cable
Box
Switch I
Afteryou have madethis connection, s ettheA/B switchto bhe"A"positionfor normalviewing. S ettheA/B switch to the "B" positionto viewscrambled
channels. ( Whenyou setbhe A/B switchto "B",you willneedto tuneyourTV to the cablebois outputchannel, w hich is usuallychanne_ 3 or4.)
English-8