Plug&Play - Samsung LN-S2641D Manual Del Usuario

Operation
Turning the TV On and Off
SOURCE Press The POWER(_ button on Theremote control.
You can also use the POWER _ button on the front of the panel.
Plug&Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1, Press the POWERO button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER_ button, then "Select the language of the OSD" menu is
automatically displayed.
2, Press the ENTER_ button to enter the language.
Press the _ or v buttons to select language, then the ENTER_ button.
"Select the antennas to memorize." menu is automatically displayed.
3, Press the A or v buttons to memorize the channels of the selected connection.
Press the ENTER_ button to select "Start".
If the antenna is connected to ANT t (AIR), select "Ai¢' and if it is connected to
ANT 2 (CABLE), select "Cable",
_,- If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable",
>'- In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the _ or _ button, then press the ENTER_ button,
Contact your local cable company to identify the type of cable system that exists in your
particular area,
4, The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER_ button when channel memorization is complete.
"Select the clock mode." menu is automatically displayed.
To stop the search before it has finished, press the ENTER_ button with stop selected.
5. Press the ENTER_ button.
Press the _ or _ buttons to select "Manual" or "Auto", then the ENTER_ button.
Switches the Daylight Saving Time function on or off.
English- 13