Samsung LN-S2641D Manual Del Usuario página 47

Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates when watching regular analog channels or when you have an analog external component
(such as a VCR) connecled.
1. Press the MENU button to display the menu.
Press the A or ,,. buttons to select "Setup", then press the ENTER_ button.
2. Press the A or v buttons to select "Caption", then press the ENTER_ button.
3,
Press the ENTER_ button to select "Caption".
Press the _ or v buttons to select "On", then press the ENTER_ button.
4.
Press the _ or _ buttons to select "Caption Mode",
then press the ENTER_ button.
Press the _ or _ buttons to select submenu (Default, CCI-CC4 or Text1-Text4)
you want, the press the ENTER_ button.
Press the EXIT button to exit.
* The default is "COl".
• CC1 : The Primary Synchronous Caption Service. These are captions in 1he primary _anguage
that must be *n sync with the sound, preferabl_ maTcneaTo a specific frame.
• CC2: The Special Non-Synchronous Use CapTions
This channel carries data that is intended to augment information carried in the program.
• CC3 Secondary Synchronous Caption Service.
ARemate program-related caption data, typically secona tanguage caPTions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2
• Text1: First Text Service. This may be various non-program re_mea area.
• Te×t2: Second Text Service. Additional data usualt_ not program relaTea.
• Text3/Text4: Third and Fourth Text Services.
These aata cnannels snoula De usea onlj if Text1 and Text2 are not sufficient.
:_ - The Caption feature doesn't work in COMPONENT(480p, 720p, 1080i), HDMI modes.
• The availability of captions depends on the program being broadcast.
English-45