Motorola Solutions DTR720 Guía De Referencia Rápida página 2

English
Charging with a Drop-In Tray SUC
The radio comes with a standard power supply and a Single Unit
Charger.
Notice: Turn off the radio before charging and fully charge the
battery before first use. It is best to charge at room temperature.
1 Place the SUC on a flat surface.
2 Insert the connector of the power supply into the port on the side of
the SUC.
3 Plug the AC adapter into a power outlet.
4 Insert the radio into the SUC with the front of the radio facing the LED
of the SUC. Ensure the radio is securely inserted all the way into the
charger.
The charger LED flashes a few times to indicate the current battery
charge when the radio is inserted in the tray rails. The light on the
charger is red to indicate that the battery is charging and turns green
indicates that the battery is fully charged.
2
Charging a Radio and Battery using a MUC
The Multi-Unit Charger (MUC) is an optional accessory and it has six
charging pockets, which allows charging up to six radios or batteries.
The batteries can be charged together with or without the radios or
placed in the MUC separately.
Notice: Turn off the radios before charging and it is best to
charge at room temperature.
1 Place the MUC on a flat surface.
2 Insert the power cord plug into the dual pin connector at the bottom of
the MUC.
3 Connect the power cord into an AC outlet.
4 Insert the radio or battery into the charging pocket with the front of the
radio or battery facing the LED of the MUC.
The charger LED flashes a few times to indicate the current battery
charge when the radio is inserted in the tray rails. The light on the
charger is red to indicate that the battery is charging and turns green
indicates that the battery is fully charged.