Examples Of Use/Sample Protocols - ARTROMOT S3 Manual Del Usaurio

Reminder:
You save the selected parameter values
by pressing the STOP key.
5.6 Examples of use/
sample protocols
5.6.1 Isolated
adduction/abduction
1. Complete the mechanical settings
and adjust the carriage to the patient
as described in section 4.2.
2. Press the MENU key on the pro-
gramming unit to access level 1 (M1).
3. Press the parameter key for internal
rotation
rotation
keys to set the carriage to the
desired rotation position to be
maintained during the isolated
abduction/adduction movements.
4. Next set the desired range of motion
for adduction and abduction by first
pressing the parameter key for
adduction
with the +/- keys.
5. Set the abduction value in the same
way .
Note!
- For an exclusive
adduction/abduction protocol, motor
B for the rotation movement must be
turned off as described in steps 6 to
8 below.
- Having programmed the ranges of
motion, you can program additional
options, such as pause or speed.
6. Press the MENU key on the pro-
gramming unit to access level 3 (M3).
7. Press the Motor B ON/OFF parame-
ter key
ter.
8. Deactivate motor B by pressing the
parameter key Motor B ON/OFF
again or the "–" (minus) key. The
check mark in the circle next to the
symbol must have disappeared.
9. Save the settings with the STOP key,
set the carriage to the starting
70
or external
and press the +/-
and set the values
to activate the parame-