Unpacking; Intended Use; Symbols And Conventions; Overview - VWR VisiScope 400 Serie Manual De Instrucciones

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the contain-
er and lift the top half of the container. Take care to ensure that the optical items (objectives and eyepieces)
do not fall out and get damaged. Using both hands (one around the neck and one around the base), lift the
microscope from the container and put it on a stable desk.
Place the observation head onto the top of the neck and tighten the lock-screw. Insert the eyepieces into the
eye tubes.
Connect the provided power supply to the power supply input jack on the rear of the microscope.

Intended use

For research and teaching and teaching use only. Not intended for any animal or human therapeutic or
diagnostic use.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.
Model Head Eyepieces
IT414 Trinocular, EWF
30° inclined, 10x/22mm,
360° rotating high-point
IT414E 5°-35° EWF
ergonomical 10x/22mm,
head with side high-point
photo tube

Overview

TH755 + T755.1
ERGONOMIC
TRINOCULAR
HEAD
CAUTION
This symbol indicates a potential risk and alerts you to proceed with
caution
Nosepiece Objectives Stage
Quintuple IOS PLAN Fixed stage,
LWD dimension:
4x, 10xPh, 250x160
20xPh, 40x mm
Quintuple IOS PLAN Fixed stage,
LWD dimension:
4x, 10xPh, 250x160
20xPh, 40x mm
Focusing Condenser
Coaxial LWD
coarse and pre-centered,
fine focusing N.A. 0.30,
working distance
72 mm
Coaxial LWD
coarse and pre-centered,
fine focusing N.A. 0.30,
working distance
72 mm
4
Illuminator Filter set
P-LED , white 8W LED, Green and
8
light intensity control frosted glass
filters
P-LED , white 8W LED, Green and
8
light intensity control frosted glass
filters