Compartments And Filters - Amibot Animal Premium Manual De Usuario

Maintenance

Compartments and filters

Dust bin
Empty the dust bin every time
the robot completes a cleaning
cycle. Remove the robot's dust
bin by pressing the release
button and empty it by opening
the magnetic cover.
Then check that there is no dirt obstructing the robot's vacuum
system.
Filters
Open the dust bin to access the filters and clean them.
1
2
1. The HEPA filter cannot be
2. The protection filter must be
3
27
cleaned, otherwise it would
become damaged. To extend
the filter's life, gently shake it
outside to remove any small
dust particles that could
accumulate. If
filter is damaged, you are
recommended to replace it to
ensure that your robot's filter
performance is maintained.
cleaned with clean water to
remove all the accumulated
dust. Wait until it is fully dry
before putting it back.
EN
the HEPA