Starting The Robot; Scheduling The Robot; Setting The Time - Amibot Animal Premium Manual De Usuario

EN
Operating the robot

Starting the robot

Attach the dust bin and switch the robot on. Press the AUTO button
on the robot or on the Remote Control. The robot starts its cleaning
cycle in AUTO Mode.
NOTES:
• When the robot leaves the home base, it beeps 5 times. Depending on the
Mode selected, the AUTO or Mapping Mode light flashes green, then the robot
starts. The light is continuous green and the mode appears on the LCD display
screen.
• If the water tank is attached, the robot starts its cleaning cycle in Mapping Mode.
• If the robot is on standby, press the AUTO button on the robot or on the Re-
mote Control to start a cleaning cycle.
• The robot's cycle can be interrupted and it can be manually controlled using
the remote control. When you reactivate automatic cleaning, the robot starts
a new path.

Scheduling the robot

With the daily schedule feature, the robot can start a cleaning cycle
at the time and on the days you choose. You can reset the time and
scheduled times whenever you want via the button on robot.

Setting the time

The robot must not be on standby to set the time. Therefore, press
the AUTO button.
14