Compartments And Filters - Amibot aNIMAL xl Manual De Usuario

EN
Maintenance

Compartments and filters

Dust bin
You should empty the dust bin
every time the robot completes
a cleaning cycle. Remove the
robot's dust bin by pressing the
release button and empty it by
opening the cover on the side.
Once you have removed the dust bin, check there is no dirt
obstructing the robot's vacuum system.
Filters
Open the dust bin's cover to access and clean the filters.
3
1. Carefully shake the prefilter
to remove any dust particles
and clean it with clean water.
Let it completely dry before
putting it back in the dust bin.
2. The protection filter must be
2
cleaned with clean water to
remove all the built up dust.
Wait until it is fully dry before
1
putting it back.
28