Broan Elite E64000 Serie Manual Del Usuario página 10

7. HORIZONTAL DISCHARGE INSTALLATION (
Slide the blower to disengage its flange from the
retaining bracket.
Flip the blower and engage its
flange in the back wall retaining
bracket.
Using a 5/16" socket and the
screws previously removed, secure
the blower to the hood.
Plug the blower in.
NOTE FOR DUAL BLOWER HOOD
ONLY: Cut off the plastic tie wrap on
left motor cable.
8. INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)
(INTERNAL BLOWER HOOD ONLY)
Using standard 3/8'' screws provided,
secure the adapter to the top (or
back) of the hood (2 screws for a
3¼" x 10" adapter/damper and
4 screws for a 4½" x 18½" adapter).
Seal the adapter to the hood using
duct tape. For round ducting, install
an appropriate sized transition and
seal the joints with duct tape.
9. INSTALL ANKE60 RECIRCULATION KIT
Refer to the installation sheet included with the recirculation kit for details.
HD0270
HD0271
HE0085
HJ0013
- 10 -
INTERNAL BLOWER(S) ONLY)
L S
EFT IDE
M
OUNTING
S
CREW
L
OCATION
(NON DUCTED INSTALLATION ONLY)
R S
IGHT IDE
M
OUNTING
S
CREW
L
OCATION
HD0272