ResMed S9 Serie Guia De Informacion página 10

H5i technical specifications
Temperature
Physical
Materials
Air tubing technical specifications
Air tubing
ClimateLine heated air tubing
MAX
ClimateLine heated air
tubing
SlimLine air tubing
Standard air tubing
3 m air tubing
Heated air tubing temperature cut-out: ≤ 106°F (≤ 41°C)
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
The temperature and relative humidity settings displayed for Climate Control are not measured
values.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
•
The electrical connector end of the heated air tubing is only compatible with the H5i air outlet
and should not be fitted to the device or mask.
10
Maximum heater plate temperature: 150°F (65°C)
Temperature cut-out: 165°F (74°C)
Maximum gas temperature: ≤ 106°F (≤ 41°C)
Dimensions (L x W x H): 6.0" x 5.7" x 3.4" (153 mm x 145 mm x 86 mm)
Weight (water tub): Docking station and unfilled water tub 1.5 lb (0.67 kg)
Weight (cleanable water tub): Docking station and unfilled water tub 1.7 lb (0.77
kg)
Water capacity: To maximum fill line 380 mL
Docking station: Flame retardant engineering thermoplastic, aluminium
Water tub: Injection molded plastic, aluminium and thermoplastic elastomer
Cleanable water tub: Injection molded plastic, stainless steel and silicone seal
Material
Flexible plastic and electrical
components
Flexible plastic and electrical
components
Flexible plastic
Flexible plastic
Flexible plastic
Length
6'6" (2 m)
6'3" (1.9 m)
6' (1.8 m)
6'6" (2.0 m)
9'10" (3.0 m)
Inner diameter
0.6" (15 mm)
0.75" (19 mm)
0.6" (15 mm)
0.75" (19 mm)
0.75" (19 mm)