Error Messages - Klarstein 10033282 Guia De Inicio Rapido

Problem Possible causes
Fan noise com- A cooling fan built into your
ing from induction hob has come on to
the induction prevent the electronics from
hob. overheating. It may continue to
run even after you ve turned the
induction hob off.
Pans do not 1. The induction hob cannot
become hot. detect the pan because it
is not suitable for induction
cooking.
2. The induction hob cannot de-
tect the pan because it is too
small for the cooking zone or
not properly centred on it.

ERROR MESSAGES

E0 No pot or pot too narrow.
E1 Voltage too low.
E2 Voltage too high
E3 Surface temperature sensor short
circuit.
E4 IGBT sensor short-circuit.
E5 Pot without water.
E6 Overheating
E7 Unsuitable pot.
What to do
This is normal and needs no
action. Do not switch the power
to the induction hob off at the
wall while the fan is running.
Use cookware suitable for
induction cooking. Centre the
pan and make sure that its base
matches the size of the cooking
zone.
Use a larger pot.
Only use sockets that correspond to
the specified voltage.
Only use sockets that correspond to
the specified voltage.
Have the unit repaired.
Have the unit repaired.
Fill the pot and restart the unit.
Check whether the air inlet or outlet is
blocked. If not, have the unit repaired.
Use a different pot.
EN
33