Cleaning The Timer-Thermostat - Gewiss Chorus GW 10 761 Manual De Usuario

Replace the timer-thermostat on the support base,
as seen in the figure below, and fix it in place using
the supplied screws.
WARNING:
- If the timer-thermostat was not powered by the bus whilst replacing the
battery, update the time and date.
- Replace all the batteries at the same time.
- Never use old and new batteries together.
- Always use the same type of batteries (do not mix alkaline and carbon
zinc batteries).
- Never throw the batteries into a fire.
- The batteries are a special waste product and therefore it must be
disposed of according to the laws in force and taken to a special collection
centre.
Use a dry cloth to clean the timer-thermostat.
USER INSTRUCTIONS

Cleaning the timer-thermostat

62
1
2