Levenhuk DTX TV LCD Guia Del Usuario página 3

Levenhuk DTX TV LCD
Digital Microscope
EN
Microscope parts
Up
Down
Setup/Delete
OK (Confirm)
Power on/off
LED Dimmer
Capture remote control unit in
Charging indicator
MicroSD slot
2.4" color LCD display
8 9
1 2 3 4
The kit includes: microscope, microscope stand, AC adapter, USB cable, HDMI cable, TV
cable, capture remote control, 4Gb microSD memory card, software CD, user manual
and warranty slip.
Focus wheel
HDMI out
1/4" screw
TV out
DC: charge battery
USB: output to PC
Photo/Video switch
Capture
Playback
10
7 6
5
11
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE and may
lead to BLINDNESS.
Microscope assembly
Take the microscope and all accessories out of the package. Place the stage on a
stable surface. Attach the mount locking ring to the metal tube of the mount. Insert the
metal tube into the opening on the stage and lock it in place with the ring. Insert the
microscope into the clamp on the mount arm and tighten the locking screw. Tighten the
locking knob to lock the mount arm in place. Place a specimen on the stage and use the
fine focus knob (11) for maximum precision and sharpness. Upon focusing your view,
tighten the focus lock knob to lock the results.
16
Display icons
17
18
12 13 14 15
Note: interface icons will be hidden if no key has been pressed and held for 5 seconds.
PortableCaptureHD software
Insert the installation CD into your CD drive. The Main Menu window will be displayed.
Click the Install PortableCaptureHD to install the application and follow the instructions
on screen. The installation CD contains a copy of this user manual, which you can read
by clicking the corresponding entry in the Main Menu. Connect the microscope to your
PC with a USB cable and run the PortableCaptureHD application. A pop-up message will
warn you if the microscope is not connected to the PC.
Capture an image
Start and stop video recording
Exposure
Total number of images that may be captured (based
on the current resolution)
MicroSD status icon
Current image resolution
Battery status indicator
3