Shark RSJ Manual Del Usuario página 13

système ne doit pas rendre superflu la fermeture
et le bon réglage de tension de la jugulaire.
HOLDING SYSTEM
Depending on the various versions and the
country concerned, your RSJ SHARK helmet
is equipped with a chin strap with a "Precise
Lock" rapid buckle with a snap lock or one with
a double D ring.
The "Precise Lock" snap lock system gives you
precise and accurate adjustment because of the
considerable length of its notched section.
However, it is essential on purchase to adapt the
length of the chin strap to your measurements.
Adjust the length of the strap using the adjusting
buckle (Figs. A, B, C and D). Choose your RSJ
helmet and attach the holding system. When the
"Precise Lock" is adjusted to the medium posi-
tion, the chin strap must be correctly tensioned
under the chin to hold the helmet firmly without
causing you any discomfort or pain.
To fasten the chin strap, all you have to do is to
thread the tongue into its place on the buckle
until tension is perfect (Fig. E). The tongue
connects and is automatically blocked.
To release the chin strap, you have to pull on the
lever (Fig. F) and remove the tongue from the
buckle. Although the notched tongue enables
you to change the adjustment precisely on each
use, it is important to check frequently that
the adjustment of the strap length is correct.
Warning: never ride with the chin strap loose or
insufficiently tightened. Even though the interior
padding gives you the impression of being held,
your helmet risks coming off in a fall.
Never apply lubricating or acid products or grease
or solvents to the chin strap buckle parts.
Additional safety system
Your RSJ helmet has a specific additional hol-
ding system that minimises the risk of coming
off. This is an additional guarantee of safety
Manuel RSJ-V03.indd 13
JuGulAire • chin strAp • Kinnriemen • cinturino • cinchA
Boucle "Precise Lock" • "Precise Lock" buckle • Verschluss „Precise Lock" • Fibbia "Precise Lock" • Cierre "Precise Lock"
13
D
E
F
06/12/12 15:43