Sony Cyber-shot DSC-TX300 Manual De Instrucciones página 13

z
Charging the battery pack quickly
If you connect the camera to the AC Adaptor using the micro USB cable, then
plug the AC Adaptor into a wall outlet (wall socket), you can charge the battery
pack more quickly than with the Multi Station.
For customers in the USA
For customers in countries/regions
other than the USA
Notes
• If the Power/Charge lamp on the camera flashes when the AC Adaptor is
connected to the wall outlet (wall socket), this indicates that charging is
temporarily stopped because the temperature is outside the recommended range.
When the temperature gets back within the appropriate range, the charging
resumes. We recommend charging the battery pack in an ambient temperature of
between 10°C to 30°C (50ºF to 86ºF).
• The battery pack may not be effectively charged if the terminal section of the
battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton
swab to clean the terminal section of the battery.
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket) immediately to disconnect from the power source.
• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
Power cord
(Mains lead)
GB
GB
13