Updating The Firmware; Displaying Device Information - Oase InScenio Instrucciones De Uso

- EN -
7.3.8

Updating the firmware

"Settings" screen
For a firmware update, the InScenio EGC Controller changes to the firmware update mode and provides a new
network. Your smartphone/tablet has to be connected to this network for installing the update.
Prerequisites for a malfunction-free firmware update:
· Other WIFI connections to the InScenio EGC Controller are disconnected.
· The WIFI connection has a strong signal.
· The OASE Easy Control app is not closed during the update.
· The power saving mode of the smartphone/tablet is deactivated.
· The smartphone/tablet battery is sufficiently charged. The update takes up to 2 minutes.
· The power supply of the InScenio EGC Controller is not interrupted.
How to proceed:
1. Tap next to „InScenio EGC Controller Firmware".
– The touch symbol is only displayed when an update is available.
2. Confirm the notes for a malfunction-free firmware update.
– The InScenio EGC Controller changes to the firmware update mode. The LED on the InScenio EGC
Controller is lit yellow
– InScenio EGC Controller makes the network „OASE_EGC_UPDATE_xxxxxx" available.
– An instruction for changing the network is displayed.
3. Connect your smartphone/tablet to the network „OASE_EGC_UPDATE_xxxxxx".
– Use the standard password of the InScenio EGC Controller for the prompt (see device label).
4. Switch to the "Settings" screen of the app and confirm the instruction.
– The update is started.
– The progress of the update is displayed.
– During the update, the LED InScenio EGC Controller is lit yellow and green.
5. After a successful update, re-connect the smartphone/tablet with the WIFI of the InScenio EGC Controller.
7.3.9

Displaying device information

"Settings" screen
Displayed information:
· Version of the app "OASE Easy Control"
· Firmware version of the InScenio EGC Controller
Touch "Further information" to display the following information:
· Serial number of the InScenio EGC Controller
· Local IP address
· IP address of the InScenio EGC Controller
· Touch
Product information / FAQ
help with problems.
30
to access the OASE website for further information about the product and