Manually Starting The Firmware Update Mode; Maintenance And Cleaning; Cleaning The Device; Spare Parts - Oase InScenio Instrucciones De Uso

8.2

Manually starting the firmware update mode

How to proceed:
5 H
1. Disconnect from the power supply.
2. Hold down the reset button.
3. Connect to the power supply again while pressing the reset button.
4. Release the reset button after approx. 2 seconds.
– The InScenio EGC Controller changes to the firmware update mode. The LED on the InScenio EGC
Controller is lit yellow
5. Establish a WIFI connection with WIFI OASE_EGC_UPDATE_XXXXXX with the smartphone/tablet.
6. Start the firmware update via the app. (→ Updating the firmware)
– The update is started.
– The progress of the update is displayed.
– The LED on the InScenio EGC Controller flashes yellow and green.
9

Maintenance and cleaning

W A R N I N G
Electrical current may cause death or severe injuries.
· Disconnect the power plug before carrying out any work on the unit.
9.1

Cleaning the device

Clean the unit with a soft, clean and dry cloth. Never use aggressive cleaning agents or chemical solutions.
These can attach the housing surface or impair the function.
10

Spare parts

The use of original parts from OASE ensures continued
safe and reliable operation of the unit.
Please visit our website for spare parts drawings and
spare parts.
11

Disposal

N O T E
Do not dispose of this unit with domestic waste.
· Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return
system provided for this purpose.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
www.oase-livingwater.com/spareparts
- EN -
33