Establishing A Connection To The Wifi Router Via Wps (Router/Cloud Mode) - Oase InScenio Instrucciones De Uso

- EN -
– It may be possible to remedy malfunctions of the WIFI connection by selecting a different channel.
2
Use the button
InScenio EGC Controller is connected to the available WIFI of a router. The smartphone/tablet has to
be connected to the same WIFI.
(→ Establishing a connection to the WIFI router via WPS (router/cloud mode))
(→ Manually establishing a connection to the WIFI router (router/cloud mode))
· Network name (SSID)
– Indicates the WIFI to which the InScenio EGC Controller is connected.
· Cloud connection
– Use the touch symbol
to disconnect it. (→ Activating the cloud connection)
· Connection status
InScenio EGC Controller Cloud is connected to the OASE cloud.
InScenio EGC Controller Cloud is not connected to the OASE cloud.
3 Device password
· A new device password is entered using the touch symbol
password in order to change it.
4 System settings
· Use the touch symbol
the operating device.
· The firmware is updated via the touch symbol
· It is necessary to enter the current password in order to carry out an update.
5 Display of the device information
7.3.1

Establishing a connection to the WIFI router via WPS (router/cloud mode)

"Settings" screen
Prerequisite:
· The smartphone/tablet is directly connected to the InScenio EGC Controller (access point mode).
(→ Establishing a direct WIFI connection (access point mode))
· Compatibility with the following WIFI standards: 802.11n+g+b
– Exclusively in the frequency range 2.4 GHz.
How to proceed:
1. Tap
2. Select "WPS" in the query.
– WPS is activated. Activate WPS on the WIFI router within 2 minutes. Read the router instructions if nec-
essary.
– The connection is established when the LED on the InScenio EGC Controller flashes green slowly
(2 seconds on, 1 second off).
3. Connect the smartphone/tablet to the WIFI of the router.
– The app "OASE Easy Control" can now connect to the InScenio EGC Controller via the router.
– InScenio EGC Controller can now be controlled using the "OASE Easy Control" app.
26
to start the InScenio EGC Controller in router/cloud mode. In this mode, the
to connect the InScenio EGC Controller Cloud to the OASE cloud or
to update the system time of the InScenio EGC Controller to the time of
.
. It is necessary to enter the current
.