Finishing The Installation - Xerox Desktop 13 Guia De Inicio Rapido

® ®
Xerox Scan to PC Desktop
® ®
Installing Xerox Scan to PC Desktop 13
®
To install the desktop-side components of Xerox Scan to PC Desktop 13, you need Administrator
rights on the target computer. For instructions on how to install the server-side components, refer
to the Server Administrator's Guide located on the server CD.
The installation media contains multiple localized versions of the associated software. To begin,
select the language appropriate for your installation. This displays a second dialog box that enables
you to Start installation or Browse CD.
Before starting installation, you can specify which components you want to install. Components
previously installed from the disk are marked with a green checkmark on the right. Then specify a
common installation directory for all components.
In the next screen, you must accept the License Agreement to proceed with the installation.
Note: If you install Image Retriever as part of the above procedure the program behavior will still
need to be configured through the Image Retriever Settings dialog for proper functioning.
Alternatively, you can configure the application at install-time. To do so, exclude Image Retriever
installation from the above procedure (unmark its checkbox) and install it separately with
command-line parameters. For detailed guidelines, see the Image Retriever documentation in the
Documentation\Image Retriever 11 folder on the desktop installation media.
®
A Xerox Scan to PC Desktop 13 silent install launches installing each desktop component without
user intervention. Users are informed of installation progress by progress monitor and application
screens. PDF Converter Enterprise will be installed automatically if you install either PaperPort or
OmniPage.
Note: On some systems, before the setup program continues with component installation, a
Windows Installer program launches to update necessary system files. After these files are
installed, a message appears instructing you to reboot your system. When Windows restarts, the
installation automatically continues.

Finishing the Installation

When the specified components are installed, complete the electronic registration by following the
on-screen instructions. You may have to restart your computer before you can successfully use the
®
Xerox Scan to PC Desktop 13 software components.
After the installation, Image Retriever is inactive and you must configure it for proper functioning.
Right-click on its icon in the system tray and choose the Settings command. The Image Retriever
Settings dialog appears. Use this to configure the program. Image Retriever is designed to monitor
• a specified folder on a networked file server or local drive for incoming scanned images and/or
• an e-mail inbox and/or
• in Professional edition, Xerox multifunction devices/printers using the PaperPort PSP Server for
Personalized MFP Scanning functionality.
Refer to the Image Retriever PDF document (available from the Start Menu, under (All) Programs
®
> Xerox Scan to PC Desktop 13 > PaperPort), for information about setting up and using Image
Retriever.
Note: You should launch both PaperPort and OmniPage at least once after installation to achieve
their full functionality.
Getting Started Guide 3