Important - AGA marvel MP36BF2 Guia De Instalacion

IMPORTANT –
• Make sure that incoming voltage is the same as
unit rating. An electric rating plate specifying
voltage, frequency, wattage, amperage, and
phase is attached to the product.
• To reduce the risk of fire, electrical shock, or injury
to persons, installation work and electrical wiring
must be done by a qualified technician in
accordance with all applicable codes and
standards, including fire-rated construction.
• The installer should leave these instructions with
the consumer who should retain them for local
inspector's use and for future reference.
It is your responsibility to:
• Comply with installation specifications and
dimensions.
• Properly install unit.
• Remove any moldings or decorative panels that
prevent the unit from being serviced.
• Make sure that you have these materials (not
provided with your unit), which are necessary for
proper installation:
• 1/4" (6 mm) copper tubing with shutoff valve
• 6 – #8 x 3" (7.6 cm) wood screws (longer
screws may be required)
• 1– Saddle valve (DO NOT use self-piercing
feature of the valve)
• Assure that floor will support unit, door panels
and contents (approximately 1200 pounds
[540 kg]).
• Provide a properly grounded electrical outlet.
• Assure that location will permit appliance doors
to open a minimum of 90˚.
Please Read and Follow
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
All safety messages will be preceded
by the safety alert symbol and the word
"DANGER" or "WARNING."
These words mean:
which WILL result in severe personal
which COULD result in severe personal
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
3
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
DANGER
Hazards or unsafe practices
injury or death
WARNING
Hazards or unsafe practices
injury or death
All safety messages will identify the
the instructions are not followed.