Informative Led Function; External Input Function - Astralpool Victoria Dual Speed Manual Del Usuario

BACKWASH PROGRAM PROGRAMMING:
Preset values: TURBO mode for 5 minutes.

INFORMATIVE LED FUNCTION

The digital timer includes an informative LED, which is placed in the right-bottom of the digital timer.
The LED has 3 different states
LED STATE
Continuous lighting
Blinking (1 sec)
Blinking (0,5 sec)

EXTERNAL INPUT FUNCTION

The digital timer has an external input which allows it to stop the pump when an external signal is received. The signal
to be plugged there must be a Normally Closed one (NC), in a way that, when the signal is open (0 Volt), the digital
timer will stop the pump function.
The external input admits voltage signals, and has 2 different inputs depending on the voltage:
• 12-24 Volt (AC or DC)
• 230 Volt (AC or DC)
The connection is done through a common wire and a wire connected to the 12/24V or the 230V input terminal.
8
Initial screen
PROG/OK + BACKWASH
The texts PROG and BACKWASH
blink in the screen
STOP/ECO/TURBO
Speed selection (Eco or Turbo)
The relays are programmed to be working, but due to an external signal, they are stopped.
Time selection (min.)
To confirm: PROG / OK
INITIAL SCREEN
MEANING
The timer is ON, without any active relay.
The timer is ON, and one relay is active.
TIME
ASTRALPOOL - Victoria Dual Speed