Lenze EZAEDE1001 Instrucciones Para El Servicio página 25

POWER LED
STATE LED Description
Red Green
m m Both Off
m Red: slow flash/3 sec; Green: Off
m Red: Off; Green: slow flash/3 sec
m Red: Off; Green On
Red: slow flash/3 sec; Green: On
Alternating: Red: flash; Green:
flash
Green: On 7 sec then 2 flashes
R & G
MASTER LED
STATE LED Description
Red Green
m m Both Off
m Red: Off; Green: On
Red: Off; Green: double flash
m
synchronized with Slave
m Red: On or double flashing; Green Off
SLAVE LED
STATE LED Description
Red Green
m m Both Off
m Red: Off; Green: slow flash
Red: Off; Green: double flash synchronized
m
with Master
m Red: Off; Green On
m Red: On or double flashing; Green Off
ERROR CODES
STATE LED Description
Red Green
m Steady Green
m Single blink Red
m Two blinks Red
m Three blinks Red
m Four blinks Red
m Five blinks Red
Steady Red
m
Lenze EDBZAEDE1001 DE/EN/FR/ES/IT 1.0
State Description
NOTE: MMC = Memory Module Copier
No power
MMC Off; Battery Charging - USB charger connected
MMC Off: Battery Charged - USB charger connected
MMC On; Battery charged or Battery operation
MMC On; Battery charging
MMC On; Battery error: Battery over-charged or temperature
too high
MMC On, Low Battery Warning
State Description
No memory module in the Master socket
Memory module inserted in Master socket; Successful
Copy if Slave =
Copying in progress
Copy operation failed. Refer to the error code table.
State Description
No memory module in the Slave socket
Memory module inserted in Slave socket
Copying in progress
Last Copy operation finished successfully
Copy operation failed. Refer to the error code table.
Error Description
No Error. Operation is successful
Data incompatible
Memory module verification failed
Slave memory module different than master
Unknown module
Access to memory module failed/timeout
General access failure
Operation
1
3
EN
11