Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Add engine oil to the upper level.
Recommended engine oil: SAE 10W30
Recommended engine oil grade: API Service SE type or higher
Engine oil quantity: 0.31L
7. Wipe the cover clean, and wipe up any spilled oil.
• Be sure no foreign material enters the crankcase.
8. Install the oil filler cap.
9. Install the cover and tighten the screws.

7.4 Air filter

1. Remove screws (1), and then remove cover (2).
2. Remove screw (3) and then remove air filter case cover (4).
3. Remove foam element (5).
4. Wash the foam element in solvent and dry it.
5. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
1200I
2100I
6. Insert the foam element into the air filter case.
TIP: Be sure the foam element sealing surface matches
the air filter so there is no air leak.
28
NOTICE
MAINTENANCE

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido