Fuel Tank Filter; Fuel Filter - Echo EGi-1200 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TIP:
Align spark arrester projection (1) with
hole (2) in the muffler pipe.
6. Install the muffler screen and the muffler cap.
7. Install the cover and tighten the screws.

7.6 Fuel tank filter

• Never use the gasoline while smoking or in the
vicinity of an open flame.
1. Remove the fuel tank cap and filter.
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.

7.7 Fuel filter

1.
Remove screws (1), and then remove the cover (2), and drain the fuel (3).
1200I
1200I
2. Hold and move up clamp (4), then take off hose (5) from the tank.
3. Take out fuel filter (6).
2100I
4. Clean the filter with gasoline.
5. Dry the filter and put it back into tank.
6. Install the hose and clamp, then open the fuel valve to check for leaks.
7. Install the cover and tighten the screws.
2100I
30
WARNING
1200I
2100I
MAINTENANCE

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido