Bollhoff RQ P1000 Manual Del Usuario página 26

EXE P1000 2000 3000 6-05:48 PAGES
2. Description of the tool
Assembly:
Mount the parts in a reverse order. On the outer surface of the jaws (fig.2 – pos.2) apply a drop of
lubricating oil, apply thin layer of plastic lubricant (we recommend MOGUL LV2-3) to the conduit-suction
complete (fig.2 – pos.8). Basic set-up of the jaws is performed as in fig.3.
2. Description of the tool
Conduit suction complet (fig.2 – pos.8)
Disassembly - take pos.802 out of pos.801. Put a wrench 7 on pos.801 (necessary press pos.803),
put a wrench 10 on pos.804 and loosen. Take both wrenches out, screw pos.804 out, take pos.803
and pos.805 out.
Assembly - put pos.802 on pos. 801. Put pos.805 and pos.803, put several drops of glue Loctite 246
on the thread of pos.801 and screw pos.804 on. Put a wrench 7 on pos.801 (necessary press pos.803),
put a wrench 10 on pos.804 and tighten them. Take both wrenches out.
6/05/14 11:34 Page 28
RQ P1000 RQ P2000 RQ P3000
L3 (mm) 15-16
Fig. 3
15-16 19-20
Fig. 4