Installing The Detector As A Standalone Device - DAITEM SH151AX 3 Manual De Instalación

2.4 Installing the detector as a standalone device

Use the LED alignment arrow on the base in order to position the detector in the best possible
manner (see Description).
1. Fix the base keeping in mind the
precautions outlined in the chapter entitled
Choosing the best place to install the
detector. The detector can be fixed in 2
ways:
Fixing the detector on a flush-mounting
box
• For Ø 60 mm boxes, use fixing holes
marked 60.
• For Ø 78 mm boxes, use fixing holes
marked 78.
• For Ø 85 mm boxes, use fixing holes
marked 85.
• Fix the base using suitable screws.
Fixing the detector on a surface
• Place the base in the planned location
and mark the position of the 2 fixing holes
with a pencil.
• Drill the holes using the right-sized
diameter drill bit.
• Fix the base in place using suitable wall
plugs and screws.
2. Position the detector on its base making
sure the arrow on the base and the LEDs
are aligned.
105
GB
Align arrow and LEDs