DAITEM SH151AX 3 Manual De Instalación página 114

GB
If the detector is Installed
as a standalone device:
• press the test button,
or
• press 2 times one of the keys
on the remote control pointed
on the detector.
If the detector is part of a network:
The detector(s) having been activated (red LED flashing) must be stopped to end network
sounding.
Detector activated
Interconnected detectors
))))))))))))))
• The 1
OR
• The 2
time one of the keys on the remote control or
st
the detector test button is pressed: interconnected
detectors stopped.
time one of the remote control keys pointed on
nd
the detector or the test button of the detector having
triggered the alarm is pressed: the detector having
triggered the alarm is stopped.
114
OR