Testing Network Connection - Tripp-Lite PDUMH30NET Serie Manual Del Propietário

Installation
Networking the PDU (Only Applicable to Models with
SNMP Network Card Installed)
For instructions on networking the PDU, please refer to the SNMPWEBCARD Quick
Start Guide on the included CD-ROM.
Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label
attached to the PDU enclosure. The MAC address is also printed on a label attached to the internal network
card.

Testing Network Connection

4-1
Access PDU with Web Browser:
After an IP address has been
assigned to the PDU, attempt to
access it with a Web browser that
supports frames, forms and Java™.
Open a Web browser on a
computer connected to the LAN
and enter the IP address assigned
to the PDU. You should be
prompted for a password
user name is admin and the
default password is admin. After
you enter the user name and
password, the PowerAlert Status
page will appear in the browser
B
window. For more information
about configuration and operation
of the PDU via the PowerAlert
interface, refer to the
SNMPWEBCARD User's Guide,
included on the CD-ROM bundled
with the PDU.
Note for Network Management System Users
Only: Two MIB files—Tripplite.mib and
RFC1628.mib—must be loaded on each
Network Management Station that will
monitor the PDU via SNMP . The files are
provided on the CD-ROM included in the
product package.
201105095 93-3048.indb 6
A
. The
A
B
6
6/15/2011 3:07:26 PM