Abicor Binzel M-Drive MFS-V3 Instructivo De Servicio página 44

8 Decommissioning
1
1 Control lead jack X46
Fig. 14 MasterLiner M-Drive control elements – back
8 Decommissioning
NOTICE
• Please make sure that the shutdown procedures for all components mounted in the welding system are strictly observed
before putting out of operation begins.
1 Use the main switch on the eBOX to cut the power to the M-Drive.
 Please see the information in the eBOX operating instructions.
EN - 18
2 Inching trigger S7
2
3
3 Wire inlet
BAL.0393.0 • 2018-08-14
M-Drive