Troubleshooting - Bruno SRE-3000 Manual Del Operador

Ocultar thumbs Ver también para SRE-3000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Your SRE-3000 is not operating correctly. What should you do?
Before calling your Bruno dealer, refer to the solutions listed below. This could save you
an unnecessary service call!
• Seat swivel. Is the seat locked in the riding position?
• Barrier arms. Are both arms completely down (rider in seated position) when
pressing the rocker switch?
• Footrest. Is there an obstruction on the stairway that the footrest is contacting?
• Carriage safety panels. Is there an obstruction on the stairway that the carriage
• Main circuit breaker (or fuse) panel of residence. Has a breaker tripped or a fuse
• Battery charger. A discharged battery will cause the carriage to move more slowly
• Visual check. Do you notice anything about your stairlift that is different or out of
place?
If your SRE-3000 continues to function improperly or not at all after completing the
preceding checklist, contact an authorized Bruno dealer to perform all required
service, repair and maintenance operations.
©Bruno Independent Living Aids, Inc.
safety panels are contacting?
until the voltage drops to the point where the controller will shut
off. If this should occur, pause for a moment, then run the carriage
down to exit the seat.
Partially charged batteries will run the carriage down, but not up.
Confirm that the charger is plugged into a live outlet and wait for
the batteries to charge. Red and green LED's are illuminated.
Is the battery charger plugged into a functional outlet? Do not use
outlets which are controlled by a wall switch.
Is the RED power light on?
Has the main circuit breaker or the residence tripped? Has a fuse
blown in the electrical panel of the residence?
®
blown?
16
SRE-3000 OPERATOR 12 JUNE 2017

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido