Rational UltraVent XS 6 2/3 E Instrucciones De Instalación página 23

Installation instruction
Scope of delivery retrofit kit:
Before installing the UV:
Installation:
4 Cover plate for left hinged units
1
1 Control cable with cable gland
2 Pipe elbow
3 Hose clamp
4 Hose
> Disconnect unit from mains, before UV is ins-
talled
> remove 6 screws at unit top cover.
Avoid unit damage!
UV installation only with all side panels of the
unit in place.
1 Remove 2 screws at rear panel of UV.
4
2 3
Attention!
GB
3
23