Getting Started; Charging Your Headset; Turning The Blue Lights Off And On; Turning On Your Headset - GN Netcom Jabra BT 620s Manual De Usuario

What your new headset can do
Your Jabra BT620s lets you connect to one or two devices (see sections 4 and 5) for
phone and music features:
Phone features
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Put call on hold*
* Phone dependent
Specifications:
• Up to 16 hours of talk time or 14 hours of music – standby time up to 240 hours
• Rechargeable battery with charging option from AC power supply, PC via USB cable
or car charger (car charger not included)
• Weight 3.53 oz (100 grams)
• Operating range up to 33 feet (10 meters)
• Advanced Audio (A2DP), Remote Control (AVRCP) as well as headset and hands-free
Bluetooth profiles
• Bluetooth specification 1.2 (See Glossary, page 13)

GETTING STARTED

The Jabra BT620s is easy to operate. The buttons performs different functions depending
on how long you press them.
Instruction: Duration of press:
Tap Press briefly and let go
Press Approx: 1 second
Press and hold Approx: 5 seconds
4
Music features
• Play music
• Pause music
• Stop music
• Pause music and answer call*
• Fast Forward*
• Rewind*
• Jump to next track
• Jump to previous track
* Device dependent
1

Charging your headset

Make sure that your JABRA BT620s is fully charged for two hours before you start using it.
Use only the chargers provided in the box – do not use chargers from any other devices
as this might damage your Jabra BT620s.
Connect the headset as shown in fig. 2 to the AC power supply to charge from a power
socket, or charge directly from your PC with the USB cable provided. When the indicator
lights are solid red, your headset is charging. When the lights turn to green, the headset
is fully charged.
2

Turning the blue lights off and on

You can turn the blue lights on or off on the headset by pressing and holding both the
play/pause/stop button and answer/end button simultaneously. When the headset is
charged the lights will be on again.
3

Turning on your headset

• Press the answer/end button to turn on your headset – when the headset is on the
LED indicator light will flash four times.
• Press and hold the answer/end button to turn the device off. The LED indicator light
will flash four times. To turn off the headset press and hold the answer/end button till
the LED indicator light flashes four times.
4

Pairing with a phone or other device

Before you use your Jabra BT620s you must pair it up with a mobile phone or/and
another Bluetooth enabled device.
1. Put the headset into pairing mode:
• Make sure headset is turned off.
• Press and hold the answer/end button until the indicator light is solid blue.
2. Set your mobile phone or other device to 'discover' the Jabra BT620s.
Follow your phone's instruction guide. This usually involves going to a "setup, "
"connect"or "Bluetooth" menu on your phone and selecting the option to discover
or add a Bluetooth device. (See example from typical mobile phone in fig. 3)
3. Your phone will find the Jabra BT620s.
Your phone or other device will ask if you want to pair with it. Accept with "Yes" or
"ok" and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone or other device will confirm when pairing is complete. In case of unsuccessful
pairing repeat steps 1 to 3.
5