Timer - Pando E-380 Manual De Instalación Y Utilizacion

•
Start up / Stop 2nd Booster
Action
nd
Start up 2 Booster
Start up 2 nd Booster
Stop the 2 nd Booster
Stop Power
Heating zone selected
[ P ] is displayed
It is possible to activate the booster function (or double booster) on several cooking zones at the
same time, for this it is necessary to use the zones in a discriminant way (A-B, A-C, B-C or A-B-C).

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 999 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Action
Select the power level
Select theTimer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
•
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
•
Egg timer function (egg time symbol):
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Re-press on the end of the "SLIDER"
Slide on the "SLIDER"
Slide on the "SLIDER"
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press display [ ]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
11
Display
[ P ]
[ and P ]
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase