Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe PuraVida 15432000 Modo De Empleo

6

Safety Notes

Gloves should be worn during installation to prevent
6
crushing and cutting injuries.
The shower system may only be used for bathing,
6
hygienic and body cleansing purposes.
Do not allow the streams of the shower touch
6
sensitive body parts (such as your eyes). An
adequate distance must be kept between the shower
and you.
The product may not be used as a holding handle. A
6
separate handle must be installed.
The hot and cold supplies must be of equal
6
pressures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
anti-pollution function
The product is exclusively designed for drinking water!
4
English
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max.80°C
65°C
≥70°C / max.4 min
Assembly see page 31

Symbol description

Do not use silicone containing acetic acid!
Dimensions(see page 36)
Flow diagram (see page 36)

Hand shower

Bath Spout
Operation (see page 42)
Hot water limiter (see page 35)
To adjust the hot water limiter on single lever
mixers, please see page 35. No adjustment
is necessary when using a continuous flow
water heater.
Maintenance non return valve
(see page 38)
The non return valves must be checked
regularly according to DIN EN 1717
in accordance with national or regional
regulations (at least once a year).
Maintenance Secuflex hose (see
page 38)
Repeat cleaning when pull out becomes
difficult.
Cleaning (see page 37) and
enclosed brochure
Spare parts (see page 40)
Test certificate (see page 44)